Light My Bricks × Star Wars™ Collection
Light Kits for LEGO® Star Wars™, Lit for the Galaxy
Your LEGO® Star Wars™ collection deserves to be seen. Bring the galaxy to life with LED light kits designed to illuminate your favourite builds, from the Millennium Falcon to the Death Star™. Transform your finished sets into display-worthy centrepieces with Light My Bricks™.
Bringing light to the Force
The Force requires patience. So does a great build. There's a meditative feeling that settles midway through, and it doesn't lift until the very last piece clicks into place. Light My Bricks™ isn't just there for the finish line. We're there for the journey too, the whole way through, long before the lights ever come on. And we're there again for every kit after this one, because the collection was never going to stop at one.
Dedicated to accuracy
Your eyes can deceive you.
But source material doesn't. Every Star Wars™ set starts the same way: we go back to the films. The Falcon's cockpit instruments run warm amber. A Star Destroyer bridge is cold, clinical blue-white. The Death Star superlaser has its own specific glow. We catalogued it all, then built each light kit around what the films actually show. Not what looks impressive. What looks right.
How It Works
An installation journey worthy of what you're building. Two unique methods. Two instructional experiences. This is where the detail lives.
-
Light As You Build
Only available with Light My Bricks. Build and light simultaneously using our step-by-step guide. The lighting becomes part of the set from the very first brick.
-
Light After Build
For completed builds. Our guide walks you through exactly where to separate, place, and reassemble. The result looks like the lighting was always part of the set.
See the difference
Same Set. Switched On.
Before
After
A long time ago…
Right there on your shelf.
-
Regular price $499.99Regular priceUnit price / per
$0.00Sale price $499.99 -
Light After You Build Only
Regular price $289.99Regular priceUnit price / per$0.00Sale price $289.99 -
Regular price $289.99Regular priceUnit price / per
$0.00Sale price $289.99
More from the galaxy
Every corner of the galaxy, lit.
-
Regular price $124.99Regular priceUnit price / per
$0.00Sale price $124.99 -
Regular price $39.99Regular priceUnit price / per
$0.00Sale price $39.99 -
Regular price $59.99Regular priceUnit price / per
$0.00Sale price $59.99 -
Regular price $49.99Regular priceUnit price / per
$0.00Sale price $49.99 -
Regular price $59.99Regular priceUnit price / per
$0.00Sale price $59.99 -
Regular price $69.99Regular priceUnit price / per
$0.00Sale price $69.99
From the outer rim
The Force is strong with these reviews.

I have been purchasing lights from you guys since late last year. I've put some together and some are put up for my retirement in a few years. Every time I buy a LEGO® kit, new or retired, I check to see if you make a kit. Having tried a couple of other brands, I won't light it if it's not Light My Bricks. As you can tell, I love your products. Your customer service is top notch. Keep it up.
Kenneth, Houston, US – Verified Buyer
Venator #75367
Really, really well done. I always love how LMB does tasteful, true to the subject, realistic lighting displays and this is no exception. It is pretty $$$ but there are a LOT of lights here to install. Instructions are top notch and the quality of the kits is so nice. I can't go back to how we used to light these sets now that we have this.Scott  – Verified Buyer
Death Star® #75419
Mando and Grogu light their way across the galaxy with this kit. This has to be at least the 20th lighting kit I've installed for my LEGO® sets and even more still on my wishlist. Thank you LMB for making every build worth it.Mark, New Albany, US – Verified Buyer
Mandalorian N-1 #75442
About Light My Bricks
We never stopped being fans.
Collapsible content
What is the best way to light up a LEGO® Star Wars™ Ultimate Collector Series (UCS) Millennium Falcon?
The LEGO® Star Wars™ Ultimate Collector Series (UCS) Millennium Falcon can be lit as you build, or if you have already built your LEGO® masterpiece, you can illuminate your already built Millennium Falcon with the 20 galactic lights using the "Light After Build" instructions.
Do Light My Bricks Star Wars™ lightsaber components actually glow?
Yes, Light My Bricks supplies specific lightsaber component packs and minifigure accessories that illuminate trans-colored blades with high-intensity LEDs. These components use 0.2mm ribbon-thin flat cables to connect into your set's main power hub.
Can you light up LEGO® Star Wars™ helmet collection sets?
Yes. Light My Bricks makes lighting for LEGO® Star Wars™ helmets as light kits and DIY light bundles, including the Darth Vader™ Helmet #75304, Kylo Ren™ Helmet #75415 and Jango Fett™ Helmet #75408. Each has base spotlights that shine up onto the helmet, highlighting its key features.
How do you hide wires on LEGO® Star Wars™ starships and vehicles?
Wires are hidden by routing 0.2mm ribbon-thin flat cables through existing Technic beam gaps and under exterior hull plates. The cables are engineered to fit snugly inside the brick channel, keeping wiring discreet and maintaining the structural integrity of the vehicle.
Are ready-to-install light kits available for large sets like the LEGO® Death Star and Imperial Star Destroyer?
Yes, Light My Bricks provides all-in-one, set-specific light kits engineered specifically for large-scale Star Wars™ models. Each kit includes a variety of LED lights suitable to the set, connectors, and 3D digital instructions, with most kits offering instructions for both Light As You Build and Light After Build installations, so you can light a set you have already built.
How do Light My Bricks LED lighting kits work?
Light My Bricks kits are dedicated LED lighting systems engineered specifically for LEGO® sets. Each kit uses 0.2mm ribbon-thin flat cables designed to fit between LEGO® studs and plates without gaps, and reverse polarity connectors that plug in at any orientation.
How are Light My Bricks light kits powered?
Light My Bricks light kits run on a low-voltage 5V, 2.4A USB input. For continuous display, connect the kit to a Light My Bricks USB Wall Adapter, which powers up to 400 LEDs in total across its two USB ports, or to a Light My Bricks USB Power Bank. For mobile displays, the Flux Pack uses 6x AAA batteries and has a 4-stage dimmer for medium-sized kits, and the compact Power Brick 2.0 uses 2x CR2032 batteries to power up to six LEDs when combined with docks. Light My Bricks recommends only its own power sources. Other adapters, including higher-voltage ones, are used at the customer's own risk and are not covered by warranty.
Why are Light My Bricks light kits more expensive than generic LED options?
Light My Bricks kits cost more than generic LED options because each kit is a complete lighting system researched and designed for one specific LEGO® set. Each kit uses 0.2mm ribbon-thin flat cables that tuck inside brick channels, brick-compatible components that clutch onto LEGO® studs with no glue or adhesive, built-in smart fuse protection, components certified to CE, UKCA, FCC, RCM and RoHS standards and set-specific light effects, with 3D instructions written for that build. Our manufacturers are also audited to Sedex and BSCI ethical trade standards.
Is it better to install a Light My Bricks kit during or after building your set?
Light My Bricks kits can be installed during or after the build, and the finished result is identical. Light As You Build suits a set that has not been started: follow the Light My Bricks 3D guide from the first brick and each lighting component is added at the point it fits most cleanly, so the set is fully lit when the last brick goes on. Light After Build is for completed sets, with no time limit, including sets built years ago. The guide shows which large sections to separate and in what order.
Do Light My Bricks light kits damage or permanently alter LEGO® bricks?
No, Light My Bricks light kits are completely non-destructive and fully reversible. Components clutch onto LEGO® studs with no glue or adhesive, so nothing can damage or discolor the bricks. The 0.2mm ribbon-thin flat cables run inside the brick channels without forcing, modifying, or gluing any original pieces, and removing the lighting leaves the set exactly as it was.
About the Collection
LED light kits for LEGO® Star Wars™
Bring your favourite builds to life with light kits for LEGO® Star Wars™ from Light My Bricks™. Designed to enhance your display, our LED lighting kits add another dimension to iconic Star Wars™ builds, capturing the look and feel of the saga across its many eras, from the Death Star™ #75419 and Millennium Falcon #75192 to the Venator #75367. Whether you're recreating epic battles, showcasing legendary starships or displaying the machines of the Empire, our lighting kits for LEGO® Star Wars™ help highlight the details that make each set special. Explore lighting options for selected LEGO® Star Wars™ sets and discover lighting kits designed to bring your collection to life. Light My Bricks™ offers lighting kits for LEGO® Star Wars™ designed to integrate with LEGO® builds, with step-by-step instructions to guide you through installation. Explore the collection to find a compatible kit for your set and give your galaxy far, far away a display-worthy finish. Each LED light kit is researched scene by scene and calibrated to the correct colour temperature for that ship, vehicle or location in the saga, then installed using LMB's brick-compatible component system. No glue, no soldering, fully removable. Light My Bricks™ designs LED light kits for the LEGO® Star Wars™ collection, calibrated to match the look and feel of the saga across all eras. The collection includes the LEGO® Star Wars™ Death Star™ #75419 LED light kit, the LEGO® Star Wars™ Millennium Falcon #75375 LED light kit, the LEGO® Star Wars™ UCS Millennium Falcon #75192 LED light kit, the LEGO® Star Wars™ Venator-Class Attack Cruiser #75441 LED light kit, the LEGO® Star Wars™ UCS Venator-Class Republic Attack Cruiser #75367 LED light kit, the LEGO® Star Wars™ Imperial Star Destroyer™ #75252 LED light kit, the LEGO® Star Wars™ UCS AT-AT™ #75313 LED light kit, the LEGO® Star Wars™ AT-ST™ Walker #75417 LED light kit, the LEGO® Star Wars™ AT-AT™ #75440 LED light kit, the LEGO® Star Wars™ X-Wing Starfighter #75355 LED light kit, the LEGO® Star Wars™ The Razor Crest™ #75331 LED light kit, the LEGO® Star Wars™ Darth Vader™ Bust #75439 LED light kit, and the LEGO® Star Wars™ Death Star Trench Run Diorama #75329 LED light kit, plus additional kits across the collection. Each LED light kit is researched scene by scene and calibrated to the correct colour temperature for that ship, vehicle, or location in the saga, then installed using LMB's brick-compatible component system. No glue, no soldering, fully removable.






